Electric
Brand: TORK CRAFT
MPN: TCMD0035-50HD-SK12
Tork Craft Brush Holder (35/37/38) Motor Service Kit (TCMD0035-50HD-SK12)
At a Glance: Replacement brush holder components for the TCMD0035-50HD motor—diagram parts (35, 37 and 38) for secure brush guidance and stable commutator contact.
Carbon brushes can only do their job properly if they’re held straight, tensioned correctly, and kept in clean contact with the commutator.
If the brush holder is cracked, heat-damaged, loose, or worn, you can get poor contact, heavy sparking,..
N$ 435.85
Ex VAT:N$ 379.00
Brand: TORK CRAFT
MPN: TCMD0068HD-SK14
Tork Craft Brush Holder (40, 41, 43, 44) Motor Service Kit (TCMD0068HD-SK14)
At a Glance: Replacement brush holder components for motor assembly reference parts (40, 41, 43, 44) on TCMD0068HD mag base drills.
Carbon brushes can only do their job properly if they’re held square, guided smoothly, and kept under consistent spring pressure. If the brush holder is cracked, worn, heat-damaged, or contaminated with carbon dust and grime, you can end up with erratic brush contact, heavy sparking, ..
N$ 328.33
Ex VAT:N$ 285.50
Brand: TORK CRAFT
MPN: TCMD0035-SK12
BRUSH HOLDER (40/42-44) MOTOR SERVICE KIT....
N$ 365.13
Ex VAT:N$ 317.50
Brand: TORK CRAFT
MPN: TCRH0800-SK04
Tork Craft Brush Holder Assembly (33, 34) For TCRH0800 (TCRH0800-SK04)
At a Glance: Brush holder assembly covering reference parts (33 and 34) for the Tork Craft TCRH0800.
Carbon brushes only work properly when they’re guided straight, held securely, and kept under consistent spring pressure. When the brush holder assembly cracks, heat-distorts, or fills with carbon dust and grime, brushes can stick or wear unevenly—leading to heavy sparking, erratic power and a motor that feels rough and ..
N$ 121.90
Ex VAT:N$ 106.00
Brand: TORK CRAFT
MPN: TCID0850-SK08
Tork Craft Brush Holder Set (24/25) Service Kit For TCID0850
At a Glance: Replacement brush holder set (parts 24 and 25) for the Tork Craft TCID0850 impact driver
Fresh carbon brushes are only half the story—if the brush holders are cracked, worn, or letting the brushes bind, the motor won’t get clean contact and performance can drop fast. The Tork Craft TCID0850-SK08 Brush Holder Set service kit replaces the brush holder components (parts 24 and 25), restoring proper brush alignment and s..
N$ 14.38
Ex VAT:N$ 12.50
Brand: TORK CRAFT
MPN: TCID1100-SK09
Tork Craft Brush Holder Set (42/44-46) Service Kit For TCID1100
At a Glance: Replacement brush holder set (parts 42 and 44–46) for the Tork Craft TCID1100 motor
Carbon brushes can only do their job if they slide freely and stay correctly aligned against the commutator. If the brush holders are cracked, heat-damaged, worn, or packed with carbon dust, brushes can bind or sit skew—causing weak power, intermittent running and excessive sparking. The Tork Craft TCID1100-SK09 Brush Holder Set se..
N$ 38.87
Ex VAT:N$ 33.80
Brand: TORK CRAFT
MPN: TCAG0115-SK12
Tork Craft Brush Holder Set Compl. (39/40/46/47) Service Kit (TCAG0115-SK12)
At a Glance: Complete brush holder set (parts 39, 40, 46 & 47) for the Tork Craft TCAG0115 angle grinder
Carbon brushes do the dirty work of delivering current into a spinning armature, but they can only do it properly if the brush holders are secure, aligned, and electrically sound. When brush holders crack, loosen, or their springs and seating points wear out, you’ll often see intermittent power, excessive spark..
N$ 53.36
Ex VAT:N$ 46.40
Brand: TORK CRAFT
MPN: TCAG0230-SK12
Tork Craft Brush Holder Set Compl. (44-46/48/49) Service Kit (TCAG0230-SK12)
At a Glance: Complete brush holder set (parts 44–46, 48 & 49) for the Tork Craft TCAG0230 angle grinder
Carbon brushes can only do their job properly if the brush holders keep them aligned, secure and making consistent contact with the spinning armature. When holders crack, loosen, or the seating/spring action becomes unreliable, you may get intermittent power, excessive sparking, cutting out under load, or a grin..
N$ 71.99
Ex VAT:N$ 62.60
Brand: TORK CRAFT
MPN: POL06-2G-SK04
Tork Craft Brush Pair, Brush Holder & Coil Spring (47–49) For POL06-2G
At a Glance: Complete brush, holder and spring kit for the Tork Craft POL06-2G polisher
The Tork Craft brush pair, brush holder and coil spring kit (Cat No. POL06-2G-SK04) is a genuine service kit for the Tork Craft POL06-2G 1500W 180mm polisher.
Carbon brushes and their springs are wear components – as they shorten or lose tension, you may notice power loss, intermittent running, excess sparking or a burnin..
N$ 46.92
Ex VAT:N$ 40.80
Brand: FESTOOL
MPN: FES495166
Festool Brush segment BS-LHS 225
Order number: FES495166
Model: BS-LHS 225 ....
N$ 1,139.08
Ex VAT:N$ 990.50
Brand: FESTOOL
MPN: FES495167
Festool Brush strip BE-LHS 225
Order number: FES495167
Model: BE-LHS 225 ....
N$ 1,889.45
Ex VAT:N$ 1,643.00